Remove the radiator from the Chery A3 or face

New product

In this article Chica Mecanica explains how to disassemble the radiator of the Chery Orinoco or A3. In simple steps, with photos and video.

Remove the radiator from the Chery A3 or face

By virtue of the many questions I have received for my social network accounts and here, for my blog. Today in this article I will take the steps to take the radiator from the Chery Orinoco or A3.

It's a simple job, but the only thing is that it has many steps.

What do you need?

-> A 10 mm wrench.

-> Pliers for the hose clamps.

-> Two blade screwdrivers.

The steps are the following:

1.- First of all, we have to take out 4 screws of the upper support plate and the 6 screws that hold the decorative plastic of the grill as seen in the image.

Sacar tornillos de plancha chery a3

2.- We take out the grill where the emblem of the brand is, with two blade screwdrivers. This grill is under pressure. Do it as seen in the following image:

Sacar la parrilla de chery a3

3.- Once the grill is outside, you can see the front part where the lock is fastened. We must loosen 5 screws that hold it. But first, do not forget to mark the position where the lock is so that when you arm it fits well, and close the hood. But you will have to do the job of matching the lock. See the following image of the procedure:

Marking of the lock. In the case of the video there is no need to mark, because it is dirty and when leaving the mark will remain as it was.

4.- Slide the lock through the central hole of the iron. At this point the radiator is free to be able to remove it. Remember that the plastic where the 6 screws were does not come out.

5.- Remove the electrical connectors from the electric fans with the help of the blade screwdriver, they are a bit problematic to remove. Also remove the 3 hoses that are connected to the radiator as seen in the image.

6.- Remove the 4 screws that hold the electros. As seen in the image.

7.- Take out the electros and then the radiator.

And ready. To assemble try to put the electro first and then place the radiator. In this way it is simpler and you will not damage the radiator fins on its front part.

Well here is a video of how I did it.

Here is a video of how it is done.

Do you have questions or doubts?

Questions or suggestions can use the form below and I will gladly answer them.

Follow me on Social Networks

boton de chica mecanica youtobeboton chica mecanica instagram

Written for Dennis García

Chica Mecánica

05/11/2018

Grade 
11/06/2018

Excelente

Gran post

    Write your review!

    Write a review

    Remove the radiator from the Chery A3 or face

    Remove the radiator from the Chery A3 or face

    In this article Chica Mecanica explains how to disassemble the radiator of the Chery Orinoco or A3. In simple steps, with photos and video.

    Ask a question

    NO registration required!

    If the question you have has not yet been answered here, use the form below to ask something about this addon.

    (optional)
    *(Required to be notified when an answer is available)

    If the download link redirects to another product that is not described in the article or is broken, report it using our Reporting Form

    RelatedProducts